Both the Trane XR13 and XR14 Air conditioners have almost the same specifications. However, still several detectable and significant distinguishing features such as noise production, energy star rating, and the difference in achieving SEER rating are there.
Trane XR 13 and Trane XR 14 refer to air conditioners manufactured by Trane. We will give you an extensive overview of these two with their specifications in this article. You will also learn about the common differences and similarities between these two.
So, without further delay, let’s go through this article!
What's On The Page
Specifications Of XR 13 And XR 14
Before we get into it, let’s look into how the specifications line up for XR13 and XR14.
Parameters | XR13 | XR14 |
SEER rating | 13.5 and up to 14.75 | 14 and up to 16 |
Energy star rating | No | Yes |
Noise Production | 71-75 decibels | 72-73 decibels |
No. of Stages | Single stage compression | Single stage compression |
Technology | Spine Fin coil | Spine Fin coil |
Compressor type | Climatuff | Climatuff |
Hot and cold spots | Can address | May not address |
Tonnage | 2-ton to 3.5 ton | 1.5 to 5 ton |
Costing | Cheaper | Pricier |
Trane XR13 Vs. XR 14: The Differences
In this section, we will discuss a few differences between Trane XR13 and XR14 air conditioners. Here are those:
1. SEER Ratings
Seasonal Energy Efficiency Ratio is the abbreviation for SEER Rating. Generally, a higher SEER rating indicates a higher efficiency level. However, modern air conditioners have SEER ratings ranging between 14 to 22.
The Trane XR 13 operates SEER ratings at 13.5 and can be up to 14.75. This places the system at the bottom end of contemporary ones. However, this does not imply that it is ineffective, but it represents that it has the most significant cost-saving improvements.
On the other hand, a Trane XR14 has a SEER rating of up to 16.00. Thus, it ensures that the Trane XR14 air conditioner system may be eligible for tax incentives for energy saving.
2. Noise Production
Depending on the type of air conditioner you have, modern HVAC systems use sound-dampening technology to limit the noise level between 25 and 55 decibels. Generally, the loudness of a whisper sound is almost 25 decibels. And a common mid-level home conversation will have a loudness of 55 dB.
There isn’t any enormous difference between the sound production of XR13 and XR14. Generally, XR13 produces noise in a decibel range of 71-75. On the other hand, XR14 generates sounds in a range of 72-73 dB. Between these two, XR13 is noisier than XR14.
3. Energy Star Rating
There is a significant difference between the two by comparing them based on energy star certification. The XR 14 has an Energy Star rating, but the XR 13 doesn’t have one.
More efficiency and lower energy expenses are two advantages of having an ENERGY STAR Air Conditioning system. Typically, air conditioning systems are often up to 20% more energy efficient than those that are not recognized according to the ENERGY STAR certification system.
This keeps the XR 14 one step ahead of the XR 13. Check out this YouTube Video!
4. Addressing Hot and Cold Spots
This feature is most important for ensuring consistency in temperature control at home. Generally, uneven temperature zones in your place need to be addressed to maintain an even temperature throughout the room.
Trane XR14 is unable to address this issue. Thus, they have trouble or fail to maintain a consistent room temperature. But Trane XR13 may address those temperature differences between floors or temperature spikes efficiently.
5. Tonnage
The term tonnage refers to the cooling capacity of an air conditioner system. This mainly indicates how much heat an a/c system removes from the room.
A Trane XR13 has a tonnage of 2 to 3.5 tons which represents a cooling capacity of 24000 BTU to 42000 BTU. On the other hand, for an XR14, the load ranges from 1.5 tons to 5 tons. This tonnage range indicates a cooling capacity of 18000 to 60000 BTU.
6. Costing
The installation cost of ac will include the price of the ac, labor cost, and any other extra fees. Generally, for installing a new air conditioner, you need to send $4000 to $13000. But the cost is slightly lower.
For installing a Trane XR13, you might need to spend an overall $4500 to $5500, including all the costs. However, for XR14, the installation cost is approximately $5000 to $6000.
Several Similarities Between Trane XR 13 and XR14
Both Trane XR13 and XR14 have several Similarities. Here are those:
1. Climatuff Compressor
Both of them have a Climatuff compressor. The Trane created this compressor to offer more effectiveness, enhanced longevity, and smoother operation. Moreover, they outperform conventional air conditioners with single-stage compressors because of their sophisticated compressor.
2. Single-Stage Unit
An air conditioner’s compressor can be of three different categories (Single stage, two-stage, and variable speed). The output of a single-stage compressor is always 100% of its capacity. Both of them have single-stage units.
Therefore, being a single stage, they can only operate at full power. The majority of homes have single-stage compressors since they are a trustworthy technology. They can heat pumps that can adjust the temperature of the house because of being single-stage.
3. Spine Fin Technology
Trane XR13 and XR14 have spine fin technology that has the lowest rate of leaking in both homes and industries. This provides the Air conditioner reliability and efficiency for years.
Both of them contain spin fin coils of all-aluminum tubes. To get a clear idea about the spine fin coil, look at this diagram:
These tubes function in stirring the refrigerant inside the air conditioners and, as a result, increase the heat transfers. Besides, these tiny fins provide a greater surface area for efficient heat transfer.
Likewise, this technology also removes the return bends, which helps to reduce the potentiality of leaks from the system.
FAQs
Does XR13 And XR14 Increase Electricity Bill?
Yes. Both of these air conditioners use 100% of the power. As a result, it will consume electric power all the time while it’s turned on. This will increase the electricity bill.
When are XR13 And XR14 Suitable For Home?
XR13 and XR14 are suitable for your home when you plan to use them for a shorter period than five years. That is because the single-stage compression system makes them both less lasting.
Which One Is Better Between XR13 and XR14?
Although XR14 is a little bit pricier than XR13, XR14 is more effective and efficient than another one. That is due to its higher cooling capacity, performance, and efficiency than XR13.
Conclusion
Both XR13 and XR14 are becoming more popular cooling systems day by day. Generally, these cooling systems may look similar at first glance, but they have numerous distinguishing characteristics. We discussed those similarities and dissimilarities throughout this article.
If you compare Trane XR13 vs XR14, Trane XR14 is better than Trane XR13 in many aspects. A few people may choose the Trane XR13 due to its lower price and consistent temperature control. So, consider your preferences and choose the best-fit cooling system for you.
- Author
- Recent Posts
David Clark
HVAC Specialist & Content Creator at HVACLABORATORY
David Clark is a highly skilled and experienced HVAC specialist with over a decade of experience. He is a founder of HVACLABORATORY located at 10 Corporate Dr, Burlington, Massachusetts. He is dedicated to providing top-notch service, staying up-to-date with the latest advancements in the field, and has been certified and licensed by the state. He has a proven track record of satisfied customers and familiar with the latest energy-efficient technologies.
Latest posts by David Clark (see all)
- Will a Bad Fan Cause AC Problems: What’s The Actual Reasons - February 3, 2024
- Can I Use A Lower-Wattage Water Heater Element: Expert Opinion - December 24, 2023
- Should I Replace My Water Heater Before It Fails: Expert Opinion - December 17, 2023
Related posts:
- Trane XR16 vs XL16i: The Ultimate Showdown
- Amana Vs Goodman Air Conditioner: Which One Is Better?